Water curtain cooling fan we should how to install

First, the fan water curtain applicable environment and role
Water curtain negative pressure fan through the active control system to realize the active opening and closing of the fan louvers to reach the role of dustproof, waterproof, beautiful. Low noise, large wind star, less power consumption, cooling effect is significant; both blowing and pumping, quality assurance, is the selection of plant cooling and ventilation.
Second, the location of the equipment device selection
1, in general, the equipment selected devices in the building's outer wall, try to shorten the convection distance; 2, the equipment can be installed in the wall.
2, the equipment can be installed on the wall, window sill, but the installation environment should ensure that the air is smooth and fresh, the water curtain should not be installed in the odor or odor gases at the exhaust port, such as: toilets, kitchens, chemical objects exhaust port. If there is no ventilation to meet the use of windows or doors, negative pressure ventilation to open the wall holes to ensure that the demand for plant air volume.
3, the water curtain fan device in the ground from 1m ~ 1.5m position, so that convection at the right height, invented a refreshing environment. 4, the water curtain fan + water curtain ventilation system installation methods - generally vertical and horizontal two.
5, to ensure that the installation of fan water curtain system at the location of the rack structure is stable, strength can support the entire equipment and maintenance personnel weight. Third, the equipment device skills requirements
1, before the device, first welded bracket with angle steel, its reference scale, by the field device needs to confirm the scale, and with six M10 expansion screws and two M10 through the wall bolts fixed in the direction to be installed 2, due to the overhaul of the safety of people into the machine and the fan itself stable needs, it is appropriate to use 40 × 40 × 4 or 50 × 50 × 4 angle steel.
3, the installation should be completed by our technical staff alone, the installation should be based on the installation diagram, and should be combined with the installation of the actual situation of the location of the drawings to optimize the installation. 4, the fan water curtain detailed installation process is as follows:.
The first step, the first to be installed fan or water curtain window removed, and the window frame clean.
The second step, according to the figure below to install the fan or water curtain, before the installation, the first angle steel welded bracket, fans and curtains to ensure that the level of the device, the fixing screws must be consolidated firmly, after the installation of curtains, pay attention to the use of glass adhesive sealing to avoid affecting the role of convection.
Next in the water curtain flow longitudinal window sill installed on the negative pressure fan.
Note: After installing the fan, also use the sealing tape to seal the edge, to avoid affecting the convection effect.
After the fan is installed and fixed, it is necessary to install a protective net at its air outlet to avoid the danger of people approaching and touching the wind wheel! The third step, according to the construction drawings and the actual situation of the placement of water pipes and water tank pump.